46587
From: bill, [dsl-o-209.nortex.net]
Subject: 6 sub wiring
|
is there a way to hook up 6 250 watt sig coil 4 ohm 12inch subs to a single amp at 2 or 4 ohm bridged amp 8 ohm would work to but i always went a little off the beaten path with crazy set ups some good some really bad any help would be great never tried this many subs so i am cureous if posible to do without major phase issues Moderated By: brian@diysubwoofers.org |
Responses:
[46588]
46588
From: andrewt, [host86-160-41-234.range86-160.btcentralplus.com]
Subject: Re: 6 sub wiring
|
buy a third channel and run two drivers from each channel. or string three together in series and then parallel two strings to give a 6ohm load or string two together in series and then parallel three strings to give a 2.7ohm load. Will your bridged amp drive a 2ohm load? or is it rated for 4ohm duty when bridged? |
Responses:
None
[ The Subwoofer DIY Page ] [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]