46532
From: khaos, [cpe-24-210-222-62.woh.res.rr.com]
Subject: JBL Control SB-5
|
I'm trying to figure out which set of drivers is producing the "positive" bass signal and which pair of drivers is producing the inverse. Its giving me fits because the diagram shows each pair wired in series (got that part) and one pair wired backward from the other (sort of understand that part). Problem is I've followed every where and they all appear to be exactly the same. Does anyone know which set is pushing and which set is pulling? Moderated By: brian@diysubwoofers.org |
46533
From: khaos, [cpe-24-210-222-62.woh.res.rr.com]
Subject: Re: JBL Control SB-5
|
I endured the pain and suffering associated with trial and error determination and think I've got a very efficient re-design of this passive sub. Its now a little heavier and a little more complicated, but sounds good. Tight and articulate. |
Responses:
[46586]
46586
From: Willibald, [c83-248-84-148.bredband.comhem.se]
Subject: Re: JBL Control SB-5
|
What modifications have you done to the SB-5? I am very interested because have a SB-5 and four Control 5 Plus that I want to use in a home theater system. The Control 5 Plus is connected to a AV receiver and they perform excellent as front+back. Can I use the SB-5 (with a separate amp) as a sub in that system and how does it perform? Moderated By: brian@diysubwoofers.org |
Responses:
None
[ The Subwoofer DIY Page ] [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]