websmall.gif (584 bytes)

[ The Subwoofer DIY Page ] [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]


46284


Date: June 09, 2009 at 11:59:31
From: Nick, [ool-4579c1f8.dyn.optonline.net]
Subject: Need help! one of my 2 subs arent working!


hey folks, just found this site and figured id post my question here.. i own 2 10inch kenwood subs in a box. they are in the back of my gti trunk. they were both bumping great and all of a sudden i had a huge power decrease. i checked it out, and only 1 was bumping. the other one only activates if i push on it and apply pressure. I tried rewiring the speaker wires, and it worked for like 20 seconds, then died on me .. any suggestions ?
Moderated By: brian@diysubwoofers.org


Responses:
[46304] [46286]


46304


Date: July 11, 2009 at 15:24:00
From: matt, [c-76-26-78-191.hsd1.wv.comcast.net]
Subject: Re: Need help! one of my 2 subs arent working!


that one is toast.......the problem might be the connection leads from the terminal to the cone........
if you know a buddy that's handy with electronics you may get them replaced....hope this helps
Moderated By: brian@diysubwoofers.org


Responses:
None


46286


Date: June 10, 2009 at 03:09:50
From: andrewt, [host86-148-96-243.range86-148.btcentralplus.com]
Subject: Re: Need help! one of my 2 subs arent working!


you have been playing it too loud.
Now the neighbours will get some peace.


Responses:
None


[ The Subwoofer DIY Page ] [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]

Generated by: TalkRec 1.18-BETA
    Last Updated: 29-Nov-2008 10:24:48, 83634 Bytes
    Author: Brian Steele