46202
From: joe, [63-231-20-47.tukw.qwest.net]
Subject: jbl stopd workin
|
i got a jbl gt01002d, it stopd working today, then i found the problem...kind of. it only works when i push the sub down. i checkd the wires around it and eveything is still connected. im thinking its a internal problem. but just seeing if there anything i can do? im alos pushing about 500w to it. Moderated By: brian@diysubwoofers.org |
46361
From: Allan, [bas5-stcatharines10-1279745186.dsl.bell.ca]
Subject: Re: jbl stopd workin
|
OHM it out!no resistance means its pooched Moderated By: brian@diysubwoofers.org |
Responses:
None
46212
From: Brian, [65.48.136.161]
Subject: Re: jbl stopd workin
|
One of the tinsel leads (the leads leading from the terminals to the cone) is likely broken. Depending on exactly where it is broken, it may be possible to repair it. |
Responses:
None
[ The Subwoofer DIY Page ] [ The Subwoofer DIY Page - Discussion Forum ] [ FAQ ]